RMES Ethernet Switch

RMES Ethernet Switch

RMES Ethernet Switch is a stand-alone network traffic managed ethernet switch with 10/100/1000 Mbps speeds on 24 ports without the need for a computer interface. The ethernet switch is capable of IPv4 / IPv6 multicast, Jumbo frame Independent and shared VLAN learning (IVL,SVL) Web GUI or CLI Management.

HARDWARE SOFTWARE DIMENSIONS ENVIRONMENT SPECIFICATION
Connectors

MIL-D38999

Memories

1Gb DDR2 SDRAM
128Mb Serial NOR Flash

Port

24 port x (10 / 100 / 1000 Mbps)

Layer 2 Switching

IPv4/IPv6 multicash
Hardware and software-based learning
Link aggregation (IEE 802.3ad)
Independent and shared VLAN learning (IVL,SVL)
Jumbo frame support

Management Access

Web Interface
RS-232 Serial Interface (CLI)

Indicator LEDs

Power LED

Power Input

Wide input rage: 12-32V DC with Reverse Polarity Protection

Power Consumption

Idle: 0.7A, 8.4W Typcial: 0.85A, 10W
Max: 1.15A,14W (with +12V input)

Port Control

Port Speed / Duplex Mode/ Flow
Port Frame Size (Jumbo frames)
Port State (administrative status)
Port Status (link monitoring)
Port Statistics (MIB counters)

Dimensions

320mm (L) x 210mm (W) x 70 mm (H)

Weight

~3000 gr

Operating Temperature

-40°C ~ +71°C

Storage Temperature

-40°C ~ +71°C

Wide Input Power Range

12-32V DC

Humidity

5% to 95% (Non condensing)

ENVIRONMENTAL QUALIFICATION TESTS

MIL-STD-810G Method 509.5 Corrosion
MIL-STD-810G Method 500.5 Low Pressure
MIL-STD-810G Method  501.5 High Temperature
MIL-STD-810G Method 503.5 Temperature Shock
MIL-STD-810G Method 507.5 Humidity
MIL-STD-810G Method 502.5 Low Temperature
MIL-STD-810G Method 516.6 Mechanical Shock
MIL-STD-810G Method 512.5 Immersion IP67
MIL-STD-810G Method 514.6 Vibration

emı/emc

MIL-STD-461F (CE101, RE101, CE102, RE102, CS114, CS115, CS116, RS103)

POWER PROTECTION QUALIFICATION

MIL-STD-1275E (Surge, Spike)