Industrial Switch

The Industrial Cisco Ethernet Switch is a network switch with 8 Ports 802.3at PoE supported and operating at speeds of 10Mbps / 100Mbps / 1000Mbps. The hardware provides access to the WEB GUI via Ethernet ports and also has USB and Ethernet CLI console ports. The Equipment has 2 SFP+ optical interfaces as well as SD Card and USB host ports. The Equipment is supplied via redundent 12 – 60V DC Vin Channels. There are 8 PoE Ethernet Port status LEDs, 2 PoE Supply activity status LEDs, 2 SFP+ Activity Status LEDs, Alarm Status LEDs, 2 Status LEDs and Reset Button. The equipment is semi-rugged and also resistant to harsh environmental conditions such as extremely high or freezing cold temperatures, vibration, humidity, shock during its lifetime.

Industrial Switch
Operating System

CISCO IOS-XE with Network Advantage and Net. Essential License

MAC address support

8,000

VLAN IDs

256

IGMP Groups

1,000

Switch Virtual Interfaces (SVIs)

8

IPv4 Unicast Routes

7680

IPv6 Unicast Routes

1024

Layer 2 and layer 3 switching
IPv4 / IPv6 Multicast
Connector

Industrial Connectors

Ethernet Channel

8-Port x 1000BASE-T with POE+ 802.3AT, 240W (up to 24 port expandible)

Thermal Managament

Conduction Cooled (Fanless)

Semi-Rugged IP30 chassis
ETH, Alarms, POE and SFP uplink Link/Activity LEDs
USB and Ethernet Management Console interface
Dimensions

~210(L) x 180(W) x 100(H)mm

Weight

~ 3kg

Operating Temperature

-40°C ~ +71°C

Storage Temperature

-40°C ~ +71°C

Wide Input Power Range

Redundant DC input voltage: 12 to 60VDC

INDUSTRIAL STANDARDS

IEC 60068-2-14 Change of Temperature Transport
                            (-40°C +85°C temperature range) 
IEC 60068-2-14 Change of Temperature Operational
                            (-40°C +75°C temperature range)
IEC 60068-2-6 Vibration Operational (Sinusiodal 5Hz-150Hz)
IEC 60068-2-27 Shock Operational (50G, 3ms, Half Sine)
IEC 60068-2-27 Shock Transport (65-80G, 9ms, Trapezoidal)
IEC 60068-2-52 Salt Mist
IEC 60068-2-30 Damp Heat (95% non-condensing)
EN 61000-4-2 15kV ESD
EN 61000-4-3  RF Emission
EN 61000-4-4 Burst
EN 61000-4-5 Surge
EN 61000-4-6 Conducted RF Immunity
EN 61000-4-8 Magnetic Field Immunity
EN 61000, EN 55032/CISPR 32 EMI/EMC Compatible